Read more to Download »

Read more to Download »

Read more to Download »

Read more to Download »

Read more to Download »

Download Link

EE302 - ELECTRONIC EQUIPMENT REPAIR

Chapter 1 | Chapter 2 | Chapter 3 | Chapter 4 | Chapter 5 | Chapter 6 | Chapter 7 | Chapter 8

Chapter 1 - Preview

Chapter 2 - Preview

Chapter 3 - Preview

Chapter 4 - Preview

Chapter 5 - Preview

Chapter 6 - Preview

Chapter 7 - Preview

Chapter 8 - Preview

EE302 - ELECTRONIC EQUIPMENT REPAIR provides knowledge and skills on troubleshoot and repair of theelectronics equipment. This course focuses on the identification of faults in audio amplifier, regulated dcpower supply, radio CD player and colour TV receiver. This course also provides knowledge and skill on trouble shoot and repair of the electronic laboratory equipment.

Course Learning Outcome (CLO)
Upon completion of this course, students should be able to:

1. Practice how to use hand tools correctly according to safety and occupational health procedures in the laboratory. (C3) 
2. Operate electronics laboratory test equipment competently as specified by the operating manual. (P1) 
3. Identify correctly diagnosis and troubleshooting techniques to diagnose fault in electronic circuit. (P3) 
4. Repair competently dc power supply, audio amplifier, PA system, radio CD player, colour TV receiver and electronic lab equipments using proper troubleshooting technique and test equipment. (P1). 

  Syllabus Contents

1. HANDTOOLS
   Safety and laboratory procedure, hand tools that are used in troubleshoot and repair activities.
2. SOLDERING TECHNIQUE
   Type of soldering tools and desoldering tools, soldering technique, good and bad soldering, type of bad soldering.
3. TESTING EQUIPMENT
   Testing equipment: analogue and digital multimeter, oscilloscope, AF/RF signal generator, transistor tester and colour TV test pattern generator.
4. DIAGNOGSIS TECHNIQUE
   Process of disassemble and assemble electronic equipment during repair activities. Faults analyzing techniques: visual techniques, injection and tracing techniques, voltages and resistances measurement technique. Testing and identifying the terminals of a passive and active component using test equipment and data sheet.
5. POWER SUPPLY
   Function of power supply block diagram, power supply circuit diagram, fault in power supply circuit and troubleshoot DC power supply unit.
6. AUDIO AMPLIFIER
   Principle, operation and troubleshoot of simple audio amplifier. Principle and trouble shoot of PA system.
7. DOMESTIC ELECTRONICS APPLIANCES
   Basic principle of radio and colour tv receiver: block diagram and function of each block, schematic diagram, identify every stage, signal tracing and injecting techniques, DC voltage and resistances measurement at given test point of radio CD player and colour TV receiver and faulty components replacement.
8. ELECTRONIC LABORATORY EQUIPMENTS
   Basic principle of audio generator and RF generator: block diagram and function of each block, schematic diagram, signal tracing and injecting technique, DC voltages and resistances measurement at given test point and faulty components replacement.

Read more to Download »

PB 201, ENTREPRENEURSHIP ENTREPRENEURSHIP focuses the principles and concept of entrepreneurship. This course concentrate on the systematic methods of getting business ideas. This course also prepare the students on ways to conduct and control the business including fundamental of management, marketing and financing. It also emphasize on the preparation of business plan, thus developing their entrepreneurial skills.

Course Learning Outcome
Upon completing this course, students should be able to:
1. explain clearly the concept of entrepreneurship, business ownership and procedures in setting up a business in case study given
2. work cooperatively in group to complete an assign project based on entrepreneurial skills

3. present creatively a business plan prepared via group based on business knowledge

Syllabus Content

1. INTRODUCTION TO ENTREPRENEURSHIP Definition of an entrepreneur and entrepreneurship, differences between the concept of entrepreneur and businessman, the competency of successful entrepreneurship. The roles and social responsibilities of entrepreneur and define e-business. 
2. ENTREPRENEURIAL IDEAS AND OPPORTUNITIES Sources of business ideas, process to generate business ideas, evaluation, approaches in seeking the business ideas and guide in choosing a business. 
3. BUSINESS OWNERSHIP Factors that influence the business ownership, types of business ownership, characteristics of each business ownership, advantages and disadvantages, the differences in business ownership and the procedure on the registration of business ownership. 
4. BASIC OF BUSINESS MANAGEMENT The meaning, function of management and the organizational structure. 
5. OVERVIEW OF MARKETING Definition and marketing mix. It also discus microenvironment and macro environment of target market and market identification, e-business. 
6. BASIC OF ACCOUNTING Definition of accounting and important of financial management in business planning and controlling. Defines asset, liabilities, owner equity, expenses and revenue, identify the functions and elements of financial statement. 
7. ENTREPRENEURIAL SOURCE OF CAPITAL AND SUPPORT SYSTEM Source of capital for entrepreneurship activities and types of business support. 
8. BUSINESS PLAN Meaning of business plan, purpose and the important of business plan, characteristic of a good business plan, business plan format and minimum requirement by financial institutions and government

Read more to Download »

Download Link

CA605 - MULTIMEDIA PRODUCTION

MULTIMEDIA PRODUCTION course provides basic knowledge on multimedia elements. This module focuses on the usage of multimedia application in video production.

Course Learning Outcome (CLO)

1. State multimedia elements specifically
2. Apply appropriate multimedia elements in producing video production.
3. Explain the effective methods of using multimedia application.

Syllabus and Contents

1. INTRODUCTION TO MULTIMEDIA
2. MULTIMEDIA ELEMENTS
3. MULTIMEDIA APPLICATION
4. VIDEO PRODUCTION 

Read more to Download »

Download Link

Chapter 1 | Chapter 2 | Chapter 3 | Chapter 4

Chapter 1 - Preview

Chapter 2 - Preview

Chapter 3 - Preview

Chapter 4 - Preview

CC203 - CONCRETE TECHNOLOGY course provides the students with the knowledge and understanding of concrete material and concrete mix design in the construction industries. The course includes conducting laboratory work for concrete testing, preparation, transportation, casting, compaction and treatment of concrete. The construction methods of reinforced, precast and pre-stressed concrete are also included.

Course Learning Outcome (CLO)

1. Describe briefly the concrete material and mixtures. 
2. Participate actively in class discussion in issues related to the importance of concrete technology and the latest products of concrete in the market. 
3. Participate actively in class discussion on issues related to the technological changes in concreting works in reducing environmental pollution concisely. 
4. Propose exactly the selection of concrete mix for different types of concrete structures according to safety design. 
5. Demonstrate positive team working attributes by contributing actively in group concreting works and laboratory tests that yield valid results.

Read more to Download »

Download Link

AW101 - COURSE  OCCUPATIONAL SAFETY AND HEALTH 1

AW101 - COURSE  OCCUPATIONAL SAFETY AND HEALTH 1 is designed to impart understanding of the basic of safety and health in workplace setting. This course presents aspects of occupational safety and health, which are essential for employees to analyzing safe and healthy environment, resulting in less hazards at the workplace. Emphasis is placed on the understanding of regulations, OSH management, accident prevention and occupational First-Aid methods.

Course Learning Outcome (CLO)

1. Describe the OSH regulations and compliance and how it will create safe working environment. 
2. Identify hazards, risks and safe work practices in order to maintain healthy and safe work environment. 
3. Perform related actions to respond to accidents at the workplace.

Read more to Download »

Download Link

CC201 - ENGINEERING SURVEYING 2

CC201, ENGINEERING SURVEYING 2 gives knowledge and understanding about control survey, detail survey, data collection or acquisition, calculation and plotting of survey works. The module puts emphasis on the method used to carry out surveying works especially data collection or acquisition to produce plan based on the scope of work. It also gives exposure to the need for accurate data to be used for other surveying works.

Course Learning Outcome (CLO)

1. Explain briefly the basic distance measurement, difference in height and figure of the terrain. 
2. Calculate accurately the coordinates of survey stations, areas and volumes of traverse using appropriate methods. 
3. Determine precisely the horizontal and vertical control point for curve ranging and setting out. 
4. Demonstrate positive team working attributes by contributing actively in engineering survey work, booking, calculation and plotting.

Syllabus Content

1. TACHYMETRY
2. AREA AND VOLUME 
3. MASS HAUL DIAGRAM 
4. CURVE RANGING 
5. SETTING OUT 
6. ELECTRONIC DISTANCE MEASUREMENT (EDM / TOTAL STATION)

Read more to Download »

Download Link

CC103 ENGINEERING SURVEYING 1

CC103, ENGINEERING SURVEYING 1 provides knowledge on basic principles of analyzing, compass survey theodolite traverse survey. This course emphasizes the basic distance measurement, bearing and angle in order to get the shape of terrain and the position on the field. It also gives knowledge and practical skills to students in operating and handling survey instruments and working procedures to perform engineering survey works, booking, calculation and plotting.

Course Learning Outcomes (CLO)

1. Describe briefly types of surveying. 
2. Explain correctly the basics and methods of measuring distance, bearing and angle. 
3. Calculate correctly the differences in heights, coordinates for surveying stations and area of a traverse. 
4. Work collaboratively in groups to complete the engineering survey work including booking and plotting.

Syllabus Content

1. INTRODUCTION Definition, types of surveying, working methods in engineering survey, principle and the usage.
2. LEVELLING Introduction, principle, instruments, terms, working procedures, booking, reduction, checking, adjustment and plotting.
3. COMPASS SURVEY Introduction, principle, instruments, terms, working procedures, booking, bearing adjustment, plotting, Bowditch’s Rule adjustment and sources of error.
4. THEODOLITE AND ITS USAGE Introduction, principle, terms, instruments, components and the functions, temporary adjustment, permanent adjustment, horizontal and vertical angle reading, working procedures, booking and corrections.
5. TRAVERSE SURVEY Traverse, working procedures, bearing observation, distance measurement, booking, calculation, corrections, adjustment, coordinates calculation, areas and plotting.

Read more to Download »

Download Link

ET201 - ELECTRICAL CIRCUIT

ELECTRICAL CIRCUITS designed to provide students with the knowledge of electrical circuits. It emphasizes the principles of an alternating current AC waveform, complex number and sinusoidal steady-state circuit analysis. This course also covers the applications of three phase system and operation of various types of transformers.

Course Learning Outcomes (CLO)
Upon completion of this course, students should be able to:-

1. explain AC circuit concept and their analyses using AC circuit law. (C2)
2. apply the knowledge of AC circuit in solving problem related to AC electrical circuit. (C3)
3. use appropriate components and measuring equipments to perform related AC electrical network laboratory exercises. (P3)
4. demonstrate team working efficiently while doing practical work. (A3)

Syllabus Content

1. ALTERNATING VOLTAGE AND CURRENT
2. COMPLEX NUMBER SYSTEM
3. SINUSOIDALSTEADY-STATE CIRCUIT ANALYSIS
4. RESONANCE
5. THREE PHASE SYSTEM
6. TRANSFORMER

Read more to Download »

Download Link

EJ501 - PROGRAMMABLE LOGIC CONTROLLER (PLC) AND AUTOMATION

Introduction
EJ501 – Programmable Logic Controller (PLC) & Automation provides knowledge regarding the concept and principle of automation system as well as PLC. This course emphasizes the relationship between relay ladder logic/hardwired and PLC, application of industrial sensors and actuators through the PLC, design process, programming and maintenance method. This course also provides knowledge and skills in designing of automation system based on the applications of PLC.

Course Learning Outcomes (CLO)
Upon completion of this course, students should be able to:-

1. explain clearly blocks, parts, components and instructions found in the automation systems.
2. construct simple automation sequential control of hardwired or PLC system based on IEC 61131 and NEMA standards.
3. handle the troubleshooting and maintenance of hardwired or PLC automation systems using appropriate equipment.
4. demonstrate problem solving skill while handling the hardwired or PLC automation systems based on IEC and NEMA standards.

Syllabus Content

1. INTRODUCTION TO AUTOMATION SYSTEM Classification and types of automation, basic concept of automation, relays, contactors, electromechanical timer, electromechanical counter and simple logic sequence. 
2. LOGICAL SENSORS AND ACTUATORS Types of logical sensor and actuator and its application. 
3. INTRODUCTION TO PLC SYSTEM Definition, terminologies, functions and advantages of PLC. PLC building structure and operation of PLC hardware units and input/output devices. 
4. PLC PROGRAMMING PLC Programming system, Logic instruction set, Sequence instruction set, Timer instruction set, Counter instruction set, Special function instruction set and application solution. 
5. PLC APPLICATIONS PLC sequential design and writing programs of PLC application in the industry (examples). 
6. SELECTING, MAINTENANCE AND TROUBLESHOOTING OF PLC SYSTEM PLC selection procedure, maintenance and preventive repair, repair steps and troubleshoot of PLC system

Read more to Download »

Download Link

EE202 - DIGITAL ELECTRONIC

Read more to Download »

Download Link

EE201 - SEMICONDUCTOR

Read more to Download »

Download Link

EC201 - FUNDAMENTAL PROGRAMMING

Read more to Download »

Download Link

EE301 - ELECTRONIC CIRCUITS

Read more to Download »

Download Link

EE101 - MEASUREMENT

Read more to Download »

ET101 - ELECTRICAL TECHNOLOGY introduces students to the principles of operation of DC electrical circuits. It covers the fundamental laws, theorems and circuit techniques. This course also covers cells and batteries, magnetic and electromagnetic circuits.

Course Learning Outcomes (CLO) 
Upon completion of this course, students should be able to:

1.  Explain DC circuit concept and their analyses with different method and approach.(C2) 
2. Apply the knowledge of DC circuit laws and theorems in solving problem related to DC electrical circuit.(C3) 
3. Use appropriate component and measuring equipment to perform related DC electrical circuit laboratory exercises.(P4) 
4. Demonstrate team working efficiency while doing practical work.(A3) 

Topics in ET101 - ELECTRICAL TECHNOLOGY

1. Unit Associated With Basic Electrical
2. Quantities Cells And Batteries 
3. Introduction To Electric Circuit 
4. Dc Equivalent Circuit And Network Theorems 
5. Capacitors And Capacitance 
6. Inductors And Inductance 
7. Magnetic Circuit, Electromagnetism And Electromagnetic Induction

Download Link

ET101 - ELECTRICAL TECHNOLOGY 

Read more to Download »